Phone Number

(281) 252-6337

Email Address


Magnolia, TX

32403 FM 2978 Suite 118,
Magnolia, TX 77354

With winter fast approaching, it’s inevitable for pool owners to slowly start winterizing their swimming pools. From deep cleaning the pool’s structure to measuring its alkalinity and pH levels, there are a lot of things that need to be done before closing down the pool for the season. However, if there is one thing that most people don’t look forward to, it’s draining their pool.

Not only is the process tedious, but the idea of it is enough to bore most people to death. But have no fear! In this blog, we will break down all the steps on how to drain a pool, making the chore super easy!

Why is Draining A Swimming Pool Important?

Before you get to draining a pool, the one thing you need to keep in mind is that a pool doesn’t have to be emptied out completely. If anything, it should only be drained halfway. This is to maintain the pool’s walls, preventing them from collapsing.

It is only advised to flush out all the swimming pool water if it has to be deep cleaned or the water needs to be replaced after years. Cleaning agents can sometimes cause solid buildup that might contaminate the pool. In such cases, draining the pool and then refilling it with fresh water is far more convenient.

When is The Best Time to Drain a Pool?

Winter is the best time to drain a pool since it prevents the water from freezing and keeps the pipes and drains running along the pool from gathering ice. Winterizing a pool is a necessary step to maintaining its lifespan, especially since it ensures the pool liner stays safe and unharmed throughout the season.

In contrast, summertime is probably the most dangerous time to flush out your pool. Even if it’s temporary, the harsh sunlight and UV rays can burn through the liner, damaging the surface. This can, in turn, cost you far more in repairs than a simple cleaning, which is why it is better to wait until the weather cools down before diving into pool drainage.

How to Drain a Pool?

When it comes to draining a pool, the most important part is to do it as efficiently as you can manage. From preventing potential damage to ensuring a smooth transition into maintenance mode, pool draining can get a little complicated if you’ve never done it before. You can expect to sit around for a couple of hours until the water slowly trickles out. Alternatively, you can also reach out to a pool technician to help clear out the pool and help you set it up for the changing climate.

  1. First, disable and turn off all pool equipment, such as the pool pumps, lights, sensors, etc.
  2. Connect a hose or pipe to direct the flow of the water from the swimming pool to the selected drain point.
  3. Once the hose is attached to the submersible pump and positioned properly, turn on the pump.
  4. Keep an eye on the water, making sure it drains through the hose properly without any leak.
  5. Check in on the draining process every now and then to ensure that the water gradually empties out.
  6. Once the water hits the halfway mark, turn off the pump and extract the hose. However, if you need to empty out the entire pool, let the water run out until the pump can no longer suck it out.
  7. If a small puddle of groundwater remains, remove the hydrostatic relief plugs and allow the water to flow down the ground until the pool is completely dry.

Long Story Short

Draining a swimming pool can be a big chore if you have never done it before. However, as long as you take good care and handle it with patience, you can easily prepare your pool for repairs and seasonal changes. Nevertheless, feel free to contact Town & Country Pools at (281) 252-6337 for a professional outlook.

Skip to content