Phone Number

(281) 252-6337

Email Address


Magnolia, TX

32403 FM 2978 Suite 118,
Magnolia, TX 77354

During scorching summers, pool time is the best leisure activity to beat the heat and is enjoyed by both children and adults alike. These days, however, are not like others due to the pandemic. Even so, there is no need to put extra chlorine in pool water to be safe; it can be hazardous.

Here’s how you can lower chlorine in pool efficiently.

Over chlorination is a common problem that mostly happens when the pool opens for a new season. Many people use the shock method to open every season.
Wondering what it is? Throughout the time your pool is non-functional, it develops bacteria, algae, and other harmful things. It is recommended to add some extra amount of chlorine than usual to send them in shock.

Miscalculated use of chlorine in the pool during this method or regular maintenance leads to a high level of chlorine in pool.

7 Tips to Lower Chlorine in Pool Water

1. Switch off the chlorine feeder and swim!

The first step to reducing the level of chlorine in the pool is to stop the feeder from releasing chlorine immediately and start swimming. The concentration of it already in the pool will soon be used up, lowering chlorine levels. Swimming accelerates the chlorine elimination process as it constantly reacts with the body bacteria to kill it.

2. UV rays

If you’re concerned about the health hazard and do not want to get in just yet, then sunshine is your next best bet. Uncover your pool in direct sunlight. Chlorine in the water and UV rays from sunlight react to liberate chlorine gas in the air. Make sure to stop the chlorination first. Monitor the levels at intervals and make sure that it does not go lower than 2ppm. Once it reaches this level, resume regular chlorination

3. Heating the pool water

An increase in temperature leads to rapid multiplication of bacteria, which consequently uses up the chlorine in pool. Continue to monitor the levels during short intervals.

4. Hydrogen peroxide

It is a potent oxidizing agent that reacts with chlorine. This reaction produces soft fuzzing bubbles. It works best at pH levels higher than seven, so it is advised to check pH first then use this product.

5. Diluting pool

An effective method is to add some fresh water to your pool after disposing off half over-chlorinated water.

6. Chlorine neutralizer

Products are available that react with chlorine and neutralize it. This reaction does not disrupt the pH levels, hardness, and alkalinity, easily lowering chlorine in the water.

7. Sodium Thiosulphate

A pre-formulated product that is added with a pool skimmer for neutralizing chlorine most effectively. The amount to add depends on the chlorine levels.

It is always important to check the pool pH level after the application of this treatment method. Its reaction with chlorine and water affects the overall pH and not just chlorine in pool water, making it too acidic.

Town and Country Pools in Mongolia Tx 77354 and Montgomery Tx 77316 has the best services with most affordable prices. Call now for details and more at 281-252-6337

Skip to content